BWTTM - 4-SERIES METROPLTN S/G WHITE & COLORS

  • MSDS: BWTTM
  • Manufacturer: PRESERVATIVE PAINT CO
  • Product Name: 4-SERIES METROPLTN S/G WHITE & COLORS
  • National Stock Number: 8010-00F038343
Product Identification

Product ID:4-SERIES METROPLTN S/G WHITE & COLORS
MSDS Date:06/03/1993
FSC:8010
NIIN:00F038343
MSDS Number: BWTTM

Responsible Party
PRESERVATIVE PAINT CO
5502 AIRPORT WAY S
SEATTLE, WA 98108-1726
US

Emergency Phone: 206-763-0300

Info Phone: 206-763-0300

Preparer: J KESLING

Cage: 86589

Contractor
PRESERVATIVE PAINT CO
80387 SEATTLE, WA 98108-1726 US

Cage: 86589

Ingredients

STODDARD SOLVENT (PETROLEUM DISTILLATE), MINERAL SPIRITS

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 25%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM


TITANIUM DIOXIDE, TIO2 (SUSPECTED ANIMAL CARCINOGEN BY

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 15%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM (DUST)


ALUMINUM SILICATE ANHYDROUS *94-4*

CAS: 22708-90-3

Fraction By Weight: 10%

OSHA PEL 15 PPM

ACGIH TLV: 10 PPM


KEROSENE (PETROLEUM), HYDROTREATED (C10-C15 SATURATED

CAS: 64742-47-8

RTECS: OA5504000

Fraction By Weight: <5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM


COATING/MATERIAL 3.47 LB/GL

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY CAUSE NOSE & THROAT
IRRITATION & NERVOUS SYSTEM DEPRESSION. SKIN: MAY CAUSE IRRITATION
& DERMATITIS. EYES: MAY CAUSE IRRITATION/BURNING. INGESTION: MAY
CAUSE GI DISTRESS. OVEREXPOSURE TO SOLVENTS MAY CAUSE CNS
DEPRESSION, CARDIOPULMONARY FAILURE, LIVER & KIDNEY DAMAGE & BIRTH
DEFECTS. (SEE SUPP)
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, HEADACHE, DIZZINESS, NAUSEA,
STAGGERING GAIT, CONFUSION, UNCONSCIOUSNESS, BURNING SENSATION,
REDDNESS, DISCOMFORT.
Medical Cond Aggravated by Exposure:PRE-EXISTING CONDITIONS INVOLVING
SKIN, LIVER, KIDNEY & PULMONARY DISORDERS.

First Aid

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH EXPOSED AREA
W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. GIVE CPR/MOUTH TO
MOUTH IF NEEDED. INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:TCC
Flash Point:105F
Lower Limits:1
Upper Limits:16
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT & SCBA. COOL CLOSED
CONTAINERS W/WATER FOG TO PREVENT PRESSURE BUILDUP.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. CAN CAUSE SPONTANEOUS COMBUSTION. VAPOR IS
DENSER THAN AIR & CAN TRAVEL & COLLECT IN LOW SPOTS.

Accidental Release

Spill Release Procedures:VENTILATE AREA. REMOVE ALL SOURCES OF
IGNITION. PREVENT SKIN CONTACT & BREATHING OF VAPORS. CONFINE &
REMOVE W/INERT ABSORBENT MATERIAL. USE SPARK PROOF TOOLS. LARGE:
ABSORB W/INERT ABSORBENT MATERIAL .

Handling

Handling and Storage Precautions:DON'T STORE >100F. KEEP AWAY FROM
EXCESSIVE HEAT, SPARKS & OPEN FLAME. STORE IN AN UPRIGHT POSITION
TO PREVENT LEAKAGE. KEEP CONTAINER TIGHTLY CLOSED.
Other Precautions:GROUND CONTAINERS WHEN POURING. KEEP & STORE OUT OF
REACH OF CHILDREN. EMPTY CONTAINERS RETAIN RESIDUES & MAY BE
HAZARDOUS WHEN EMPTIED. AVOID BUILDUP OF SPRAY DUST/OVERSPRAY IN
BOOTH/DUCTS.

Exposure Controls

Respiratory Protection:PROPERLY FITTED VAPOR/PARTICULATE RESPIRATOR
APPROVED, NIOSH/MSHA.
Ventilation:MECHANICAL: USE EXPLOSION PROOF DEVICE IF REQUIRED.
Protective Gloves:SOLVENT IMPERVIOUS
Eye Protection:GOGGLES/SAFETY GLASSES W/SIDE SHIELDS
Other Protective Equipment:SAFETY SHOWER, EYE BATH, COVERALLS, SOLVENT
IMPERVIOUS APRON, SPRAY BOOTH.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
PREC. CONT'D: DON'T APPLY TO HOT SURFACES. HEALTH HAZARDS CONT'D:
REPEATED/PROLONGED OVEREXPOSURE TO SOLVENTS MAY CAUSE PERMANENT
BRAIN & NERVOUS SYSTEM DAMAGE. DON'T SAND/FLAME CUT/BRAZE/WELD DRY
COA TING W/O WEARING NIOSH/MSHA APPROVED RESPIRATOR/APPROPRIATE
VENTILATION. WHEN SPRAYING, KEEP SPRAY BOOTH CLEAN.

Chemical Properties

Boiling Pt:B.P. Text:301-334F
Vapor Density:>1
Spec Gravity:1.1
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR & PIGMENTED COATINGS W/CHARACTERISTIC ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIALS.
Stability Condition to Avoid:EXCESSIVE HEAT, SPARKS, OPEN FLAME, HOT
SURFACES & OTHER SOURCES OF IGNITION.
Hazardous Decomposition Products:OXIDES OF CARBON.

Disposal

Waste Disposal Methods:DON'T ALLOW MATERIAL TO CONTAMINATE GROUND WATER
SYSTEMS. DON'T INCINERATE IN CLOSE CONTAINERS. DISPOSE OF ABSORBED
MATERIAL IAW/FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.